Tires/Tubes

Continental's Olympic II is the world's most formidable racing tire. It is the absolute top-of-the-line tubular for all track disciplines, permitting inflation pressures of up to 220 psi. This tire has also been optimized for exceptionally low rolling resistance and minimum weight. Plus, Continental's Black Chili rubber compound provides a fantastic grip on both wood and cement tracks and outstanding durability. The Olympic is your new secret weapon!

Wrathlorde is an extreme-conditions fat bike tire designed for ultimate traction on challenging surfaces. Aggressive, tightly-spaced lugs decrease rolling resistance without compromising on traction, while 300 XL concave studs bite into ice for complete confidence. - 120 TPI tubeless-ready casing - Aggressive, tightly spaced center lugs with siping for a blend of rolling speed and traction - Tall side lugs for traction in corners - 300 XL Concave Studs for ultimate traction on ice - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. - XL Concave Studs - Deep lugs provide accelerating, braking, and cornering traction - Open tread pattern sheds snow - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- Aggressive Tread Design - Enhanced Steering Performance - Off Camber Grip - Low Rolling Resistance - Excellent Float - Great for blocked trails or loose snow - 240 studs

Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice. Details: - Fast-rolling center tread for carrying speed - Large, braced side lugs for predictable cornering performance - Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern - 60 TPI and 120 TPI casing options - Tubeless-ready for supple ride quality, more grip, and weight savings - We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- Aggressive Tread Design - Enhanced Steering Performance - Off Camber Grip - Low Rolling Resistance - Excellent Float - Great for blocked trails or loose snow - 240 studs

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

- Studded tire for added traction when conditions get icy - Weight optimized 120tpi casing, Silica rubber, max tire pressure 20psi - Tubeless ready bead/casing

Fat bike tire for the most extreme conditions. - Optimized tread for deep mud and snow - Extremely stable braking and traction edges in the middle area - Long leading edges in transition and shoulder areas for more controlled steering response - Evolution line, with Super Ground construction - Addix SpeedGrip compound - ECE: E-25 - 1700g Note: this tire is not studded but has spike ready blocks.

Power Cross Jet tire features small blocks on the tread pattern provide excellent tread strength and maximum speed. - Improved transmission of pedaling power for controlled grip - Specially adapted reinforcements provide safe, low-pressure riding on all terrains

- Ammonium/latex/protein free sealant

P ZERO Race Tub SL is the result of the endless process of research and development, a racing tubular that has the same speed and handling performances of it's predecessor, just lighter. Pirelli replaced the standard latex inner tube with TPU (thermoplastic polyurethane), a cutting-edge material that blends the same qualities of speed and puncture protection of the latex with a significant weight reduction. - Features the SmartEVO compound, a high performance rubber blend that has been specifically developed to maximize handling and grip performance on both dry and wet roads, without compromising rolling resistance - Built on a fine 320tpi Corespun casing, reinforced with aramid fibers for added puncture protection while delivering comfort and precise handling. The dimension of the casing has been tested and developed for wide modern tubular rims - The tread and profile take advantage of Pirelli’s extensive motorsport experience: the lightning bolt pattern design features narrow angles at the center of the footprint to promote regular wear and progressive feedback, while the wider lateral angles provide solid behavior and responsiveness at the end of the lean

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

LIGHTER, GRIPPIER, FASTER. The ‘turbo’ of spike tires. With up to 402 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The tire remains agile and sporty. Brand new studded tires must be ridden around 40km on asphalt roads without heavy acceleration and braking. This 'bed-in period' will ensure studs are fully set, after which, the studded tires can be used normally. - Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving you Total Confidence to ride at your best.

CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry. As our customers say, “It’s a no-brainer for E-MTBs.”

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33 – 46mm and inner rim widths 19 – 26mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

The Surly Molenda tire is made for the Surly Moonlander bike. Designed to power your Moonlander over previously unridden terrain, this tire features a spacious 6.2” tread to keep you rolling over loose, unconsolidated debris, sand, and snow without a hitch. A deeply grooved tread spans the footprint for maximum flotation and traction when clambering over rocks, roots, logs, and anything else in its path.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction

Many of the fastest riders in the world place their trust in these handmade German tubulars. The Competition is a world-class tire proven everywhere from the cobbles of Paris-Roubaix to your local crit series. The 180-thread-per-inch, 3-ply casing offers a velvety-smooth ride and the Vectran sub-tread provides exceptional puncture protection, reduced rolling resistance and a great road feel.

Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions. - Siping creates a more conforming lug for added traction - Concave carbide studs provide traction in the iciest conditions - Reflective strip on sidewall makes you more visible when riding in low-light conditions - Fits most bikes with cantilever or disc brakes

BOS is the airport code for Boston, Massachusetts, the original hotbed of North American ‘cross and home to some of the harshest weather and the toughest courses. If you’re pinning on a number in New England you better be ready for rain, roots, ruts and mud. And, you better have a set of Donnelly BOS tubulars in your quiver. This tire is even more aggressive than our mud-proven PDX. It features buttressed side-knobs for outstanding traction in super muddy corners and off-cambers, and a center tread pattern that is all bite when it comes down to a tractor pull. Size: - 700 x 33mm Weight: - 386 grams Type: - Tubular Part #: - D50030 Product Features: - Buttressed side-knobs for superior cornering traction. - Unique center knob pattern designed for maximum traction when you need it most. - Soft rubber compound provides extra grip and shock absorption. - Tubeless design means an airtight casing with no inner tube to puncture. - Rubber-coated sidewalls are extremely durable and prevent deterioration from water, mud and dirt. - No additional sidewall coating necessary. - All in one construction means tread will not peel away from the tubular casing. - Precision design creates a straight tire with no variances in size or alignment. - The tire and base tape are consistently straight making it easy to glue and install to your wheel. - A removable valve core allows for valve extenders installation as well as insertion of tire sealant. - Liquid sealant can be used with all Donnelly tubulars to prevent or repair typical punctures.

- P Zero Velo TUB brings the handling and cornering behavior Pirelli is famous for to the finest handmade tubular construction. - It was developed on the fields of World Tour racing and in its debut year it already is a winner of a grand tour. Now available for your own. - Corespun 320tpi w/aramid reinforced casing. - Anti-puncture belt under the tread. - Latex inner tube for better weight, rolling and anti-puncture. - Soft yellow compund for racing usage. - Designed for modern wide tubular rims. - 48 mm RVC valve.

Lou is the 26 x 4.8" rear-specific mate to Bud. Lou’s tread is much like Bud’s with tall knobs designed to grind, crawl, and claw its way over rooty, rocky, wet, muddy, loose, or otherwise inhospitable terrain. Lou’s tread pattern is a bit different, however, made for stability while both braking and accelerating. Its casing is durable, thin-walled, 120tpi which conforms well to the ground surface shape. - Folding Kevlar bead - Tubeless Ready

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

This is Bud, a front-specific 4.8" tire designed for 559mm (“26 inch”) rims. While our 100mm Clown Shoe Rims will offer the most ground contact and the best shape profile, Bud (and his brother, Lou) will also work on rims down to 65mm wide. Bud’s aggressive mud- and snow-shedding tread is characterized by tall (7mm), siped knobs, arranged in a pattern ideal for the unique requirements of steering and braking. A supple, durable 120tpi casing with folding Kevlar bead conforms well to ground surfaces of all types. - Folding bead - Casing: 120 TPI - Max pressure: 30psi - Weight: 1600g

The must-have kit for all tubeless tire users! The Tubeless Road Kit is the Vittoria all-in-one package for the best experience on your tubeless tires. The kit contains two Air-Liner Road inserts, one Universal Tubeless Tire Sealant bottle and the Road Tubeless Tool-kit - pliers and clips for easy tubeless tire removal. Contains two Air-Liner Road inserts, liquid sealant and pliers for easy tire removal. *DISPLAY BOX NOT INCLUDED THROUGH ONLINE SALE* Sizing recommendation: - Small, 700 x 23-26mm - Medium, 700 x 27-29mm - Large, 700 x 30-32mm

Schwalbe's Ice Spiker Performance Line tire is the "turbo" of studded tires. It sports 361 spikes that bite firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The Ice Spiker is the best way to be agile and sporty while staying upright when the roads ice over. Note: In order to ensure that spikes are permanently fixed, tires should be run in for about 25 miles (40km) on asphalt, while avoiding any fast acceleration or heavy braking.

The ‘turbo’ of spike tires. With 361 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The scales stop at 695 g, yet the tire remains agile and sporty. - Schwalbe's Performance line of tires offers excellent quality and the best value for an intensive-use tire.

Meet Edna: Surly's latest ultra-versatile fat bike tire. Edna was designed to perform admirably on a wide variety of terrains. Wanna go ride some super loose dirt or snow trails? Do it. Feel like riding over the pulverized bones of your enemies or, as some people call it, sand? Go for it. Hardpack? Lean back and let ‘er rip. Edna’s unique tread pattern has enough lug to provide bite on the loose stuff and a tight center tread that doesn’t drag on the hard. Add in a 4.3” footprint and you have enough traction and float to ride wherever and whenever you damn well please. - Folding bead - Casing: 60 TPI - Max pressure: 30psi - Weight: 1330g

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

- Well-spaced and siped lugs help keep rolling resistance at a minimum even while running low air pressure - Large siping of lugs provides additional grip in sand, snow, and other unfavorable conditions - Staggered corner lugs provide a stable and predictable turning platform - Available in 120 TPI for a supple, obstacle conforming tire, or 30 TPI for a durable yet forgiving casing

Let Dunderbeist loose on your local groomed single track and feel the aggressive tread claw through the snow with unrivaled propulsion and braking traction. Its 4.6-inch footprint provides enhanced flotation and is compatible with a wide range of frames. Dual compound rubber rolls fast and keeps you in control while shredding the berms. Point uphill and feel the Dunderbeist dig in as you attack climbs covered in loose, unconsolidated snow. Pair Dunderbeist with its sibling front tire, Flowbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a rear tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Flowbeist front tire

Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a front tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Dunderbeist rear tire

We named this tire for our friend Nate, who is also quite large and aggressive. This tire has a shred-your-face-off, run-over-anything, kung fu grip knobby tread pattern. The casing is round and supple. Tall, widely-spaced knobs are siped for added grip and compliance. The knobs’ wide spacing means they dig deep and still shed the crap you’re riding through. The tread wraps a little around the sides of the tire, providing good knob contour even on very wide rims, which in turn allows good off-camber traction. Similar to our beer preferences, Nate is available in black and tan. - Folding bead - Max pressure: 30psi

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

The Tempo II is one of the fastest track tubulars in Continental's arsenal, gathering medals at international track events the world over. It has also found its way onto the gossamer bikes of the WorldTour's elite climbing specialists when they need to trim grams to an absolute minimum on race day. The Tempo II features a very fine 3-ply, 180 thread-per-inch casing for a high-quality ride. And, its fine cross-hatch tread pattern maximizes grip without adding rolling resistance to give you the ultimate in speed.

The Strada is Challenge's go to tire for long days on the road. This all-condition tire combines a round profile that takes the sting out of rough pavement with a construction that provides maximum control and low rolling resistance. This tire takes tubeless to a higher performance level by combining TLR's properties with a handmade construction for the ultimate in traction and ride quality. This tire includes PPS Ganzo, a lightweight and supple Puncture Protection System placed between the tread and casing to increase resistance to punctures. And puncture protection is enhanced when combined with the appropriate tubeless sealant. 260TPI SuperPoly casing.

- The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering. - The reference in Downhill and Trail tires - Front specific design, but the DHF also makes an excellent option for a rear tire, with its balanced driving, braking, and cornering traction - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

- RR-S AR Compound offers outstanding grip on both rough roads as well as pavement in all weather without compromising on speed - Single-layer SRC casing delivers an incredibly supple ride with superior rolling efficiency at a super low weight - Race Shield puncture protection provides superior puncture protection without compromising speed or road feel - Carbon/Kevlar Composite bead keeps the tire secured to the rim and provides greater strength to withstand the higher pressures needed for road tires

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium - 3C MaxxTerra is an intermediate triple compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

E-Wild front tire has extra grip. Using E-GUM-X, a new rubber compromising lateral and central rubbers designed to optimize grip, with a tread pattern from the Enduro ranges for a better hold. - Gravity Shield casing - Specifically for front mounting - E-Bike ready

Continental's Cyclo X-King Tubular rolls quickly, grips great and showcases the ride quality that you expect from a handmade German tubular tire. Short, smartly spaced center knobs speed you down the course, and taller square knobs line the shoulders for excellent cornering and control in a variety of conditions. The result is an awesome performing cyclocross tire you'll love.

- The favourite among downhill and enduro experts. - The perfect choice for virtually any track. - Intermediate tread: maximum brake traction and corner grip even on extremely muddy terrain thanks to strong shoulder studs and the aggressive, open tread design.

The Mezcal XC Race is built using a new XC Race Formulation and has been torture tested at the UCI elite levels. The Race Formulation employs Graphene and Silica, providing increased wet grip and suppleness, and combines a 60TPI tubeless ready casing to optimize deformation. This combination has been shown to reduce rider fatigue while simultaneously increasing race-day reliability. The continuous center line maintains fast-rolling contact, and its offset extensions are siped to multiply the number of leading and trailing edges, propelling you up the trail on climbs and increasing bite while braking. The rear siping on the shoulder knobs runs parallel to the trail with variable widths and open trailing edges, so the Mezcal corners fast on hard, slippery surfaces – despite being such a fast-rolling tire. For climbing, cornering, or careening down hill, no tire cooks like the Mezcal. - Race Formulation: Graphene + Silica Compound provides speed and grip without compromise. Designed to be the absolute fastest option from point A to point B - 60 TPI Nylon Casing provides a supple feel with dependable nylon construction, providing reduced rider fatigue and increased race-day reliability. World Championship proven Tubeless-ready technology ensures easy inflation and dependable air retention - Hookless Compatible

The Grand Prix 5000 S Tubeless Ready allrounder tires are lighter, faster and supported with stronger sidewalls, compared to previous GP5000 versions. Designed to be compatible with hooked and hookless rims, this new standard in road tubeless ready technology will allow you to ride faster, more comfortable and with increased puncture protection. - Hookless rim compatible up to 73 PSI / 5 bars - The tubeless ready (TR) carcass construction is robust and impervious against damage and penetration from foreign objects. The result: versatile, low weight and an attractive design. In addition, tires made using this technology can also be used as Tubeless or with an inner tube - Vectran Breaker is a synthetically manufactured high-tech fiber with an enormous tear resistance at a very low weight: Exactly the right properties to process into a premium Continental bicycle tire as a puncture protection insert - Active Comfort Technology absorbs vibrations and smoothens your ride - Lazer Grip, to make you one with the road. The lazered micro profile structure expands over the tire’s shoulder and provides outstanding cornering - BlackChili Compound provides the best balance of grip and rolling resistance for cycling

The Eddy Current's solid appearance comes from stable tread blocks, more rubber, and big widths. It allows uncompromising riding, even uphill, and holds up to fierce acceleration as well as technical riding on the trails. The aggressive tread arrangement, open design, and concise V-Grooves in the center and side blocks offer direct, precise steering characteristics and perfect transmission of power to the ground, all with extreme durability. - Tread blocks are up to 20% more massive than other Enduro/All Mountain profiles