Cranksets

Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DZero DUB power meter is made for. Train harder, ride faster and unlock your ultimate potential.  - Specifically designed for use with XX SL Eagle T-Type Thread Mount chainrings (Sold separately) - AXS™™ enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED® and Force eTap AXS™™ cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48

- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline - Spindle Type: 120 SQR JIS

RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately

The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

- Quarq D1 crank arm assembly - 8 bolt interface for use DZero DUB and DFour DUB power spiders

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included

When SRAM found ways to make their lightest and stiffest crank even lighter, they went for it. A new process further grams from the hollow carbon arms. Plus they're offering more crankarm lengths than ever before to ensure this crank works for you. - Hollow carbon crank arms are 29g lighter than previous generation - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings (Spiders and Chainrings sold separately) - DUB bottom bracket adds durability and simplicity (Sold separately) - Includes DUB Wide Spacer kit (2.5/3.0/4.5/5.5 mm) - 150mm Q-factor / 47.5mm chainline

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires

Origin-8's Trackstar Crankset is made of light and durable forged aluminum and features a stylish machined-aluminum 46-tooth 1/8-inch chainring for excellent power transfer on the road and track. - Single speed crankset - Forged AL6061-T6 alloy crankarms - CNC alloy 1/8" 46 tooth chainring - 42mm chainline with 103mm JIS BB

- Forged steel - 24 TPI

All Box One and Two cranksets are engineered and crafted using our Oversized Technology. we all know that there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. During the creation of our cranks, we were obsessed with Power delivery AKA pedaling stiffness. To reduce lateral deflection at the bottom bracket we chose to enlarge the spindle and the crank arm’s interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time. Key differences: The Box One M30 crankset is just as tyrannical as its big brother the Box One M35. Since it's designed for the smaller rider the now 30mm spindle is as extreme to a smaller rider as the 35mm is to a burly world champion. The crank arms are hollow-forged but reduced in size for their application. It is possible to add too much stiffness where the rider will not feel the benefits. Going beyond that point simply adds material which is surplus weight. We’ve removed the stabilizer rings from the spider and removed unneeded material from its legs. These cranks are engineered for smaller-sized racers. FEATURES - Oversized Technology™ - Hollow Forged Design - Large 30mm Alloy Spindle - Self-Extracting Crank Bolt System IMPORTANT NOTES - BB86 frames require Praxis™ part 86-4001B or 86-4001W. - BB30/PF30 frames require Praxis™ part 68-4001R or 68-5401R. - T47 frames require Praxis™ part 47-0000. - Do not use pedal washers when installing pedals onto these cranks. M30-M cranks were designed to be used without pedal washers. COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two Oversized bottom bracket M30

Salt Plus Metron Cranks - Tubular chromoly arms (heat-treated), chromoly spindle - Strong, lightweight crank with 48-spline spindle - Left & right side sprocket bolt boss - Heat-treated seamless crank arms - Includes bottom bracket - Bore: 19 - Crank Length: 175mm - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Mid - BB Included: Yes

The Box Four Crankset features a 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance. Box Four Cranks feature steel pedal inserts that require pedal washers and external sealed bearing BSA bottom brackets, and both are provided in the box. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard FEATURES - Oversized Bottom Bracket Interface - Dual Pinch Bolts for Even Clamping Force - Spider with Flex-Resistant Ring COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two 24mm bottom bracket - Box Extremum RacePrep bottom bracket

Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset. - High-quality anodized finish - Precise and reliable shifting

- 2-PIECE CRANKSET for 157 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 181 mm - Direct mount chainring - Chain Line 56.5 mm - 1x12-speed

Shimano's new FC-RX600-11 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding, with tighter gear steps for maintaining optimum pedaling cadence. The 2x11-speed crank is available in a 46-30T or 40T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T, 40T

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor

The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget. - For 11-speed drivetrains - Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length - Affordable and high-end style crankset

The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty

• 8-speed Road crankset • Square taper interface • Does not include BB • 1300 grams

• Forged steel • Square taper • Compatible with 9/16" pedals • Pairs • Cotterless

- Compatible with 1/2" pedals - Forged steel - 24 TPI

- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS

• Singlespeed crankset • Forged alloy crank arms • Square taper interface • Does not include BB • 42-tooth chainring • Double chainring guard • Bolt Pattern: 104 x 4-bolt • 670 grams

• 6/7/8-speed MTB crankset • Square taper interface • Alloy arms • Replaceable steel chainrings • Does not include BB • Bolt Pattern: 104/64 x 4-bolt

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed

- Crank Construction : HOLLOWTECH II - Optimum power transfer

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

Origin-8's Classic Sport Single Crankset is made of light and durable forged aluminum and it has a stylish machined-aluminum 46-tooth chainring to make your bike the coolest ride on the block.

- Triple replacement crankarms - Cold Forged alloy construction - Great for Recumbent or Junior road rider applications - Does not include BB - 130/74mm bolt-circle diameter - 145mm crank arms

Put the power down with Origin-8's Alloy Crankarm Set. Made of light and durable forged aluminum and for a single chainring and square-taper bottom bracket (both sold separately), these crankarms are great for your sweet urban rig or mountain bike.

- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x

Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy

Forged AL6061-T6 alloy spiders for Origin8 Thruster Series modular cranksets - SRAM 3-bolt interface for crank arm mounting - Available in both single and double chainring configurations for MTB, Boost/Fat, and Road/Cross/Gravel applications - BCD: 104mm 4-Bolt - Type: 1x

- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Inner Length: M8x7.5mm Bolt (x4) / M8x7mm Nut (x4) - Material: Steel - Type: 1x

- Forged AL6061-T6 alloy crank arms for Origin8 Thruster Series modular cranksets - SRAM 3-bolt interface for direct mount chainrings and spiders - 24mm integrated Chromoly spindle - Crank arm tip protectors included with MTB/Boost and Fat 100/120 crank arm sets

The Vision Track Crank features oversized solid forged aero arms optimized for rigidity and a deep-tooth 49T chainring, as well as an ultra-stiff 30mm spindle. The 386EVO spindle design assures compatibility with all major bottom bracket shells. - Solid forged alloy 6061 - Forged 7050 30mm spindle - Polished anodized black with laser graphics - Number of Chainrings: Single - Chainline/Hub Compatibility: 120 Hubs - Crank Intended Use: Track - Pedal Spindle: 9/16" - Rings: 49 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chainring BCD: 144 - BB Included: No

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

FSA Shimano STEPS eBike replacement crankarms.

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.

The Shimano FC-RX820 crank balances weight savings, optimized efficiency and an array of gearing options that cater to the segmented demands of mixed-terrain riding. - Gravel-optimized 48-31t gear combination ratios preserve riding rhythm on rough surfaces - The 17t range covers an array of riding conditions - Smaller gear steps for cadence control on mixed-terrain riding - Hollowtech II crank arms provide strength and stiffness with the benefit of weight savings - Compatible with HG 12-speed chains - 47mm chainline - 151mm Q-factor

- XT M8100 12 speed crankset - Fits Boost and non-Boost MTB - Hollow forged crank maximizes power transfer while limiting weight - Direct mount chainring type - Chainline : 52mm

Shimano's new FC-RX600-10 crankset balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding and to provide tighter gear steps for maintaining pedaling cadence. The 2x10-speed crank is available in a 46-30T chainring combination. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T

The Sword 1x crankset is designed for simplicity. With a single, chain-retaining ring mounted to the crankset's outer ring position, it pairs perfectly with the rest of the Sword 1x drivetrain to give you the stiffness, chain security, and ease of ownership you expect from a 1x drivetrain. It's designed to be as compatible as possible: the 24mm spindle is compatible with a ton of aftermarket bottom brackets, and it's easy to convert from a 1x to a 2x crank by simply installing microSHIFT Sword 2x chainrings. - Wide design optimized for 50mm chainline - 24mm spindle compatible with Shimano bottom brackets - 1x chain-retaining ring works well with clutch derailleur - Easy conversion from 1x to 2x

The Box Three Crankset features a hollow-forged 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance. Box Three Cranks feature steel pedal inserts that require pedal washers and externally sealed bearing BSA bottom brackets, both provided in the box. FEATURES - Hollow Forged Design - Dual Pinch Bolts for Even Clamping Force - Spider with Flex-Resistant Ring COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two 24mm bottom bracket - Box Extremum RacePrep bottom bracket

Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB

- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The Quarq DFour DUB Power Meter is paired with the Quarq DUB Crankarms to pair with your Dura-Ace R9100 or Ultegra R8000 chainrings. A SRAM DUB Bottom Bracket will be required for installation. FEATURES - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad -- no cadence magnet required - 10K Temperature CompensationBattery -- CR2032, 200-hour battery life, change without tools - OmniCal -- swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy -- within 1.5%, measuring both legs. SPECIFICATIONS - Speeds: 11 - Crank arm length: 170mm, 172.5mm, 175mm - BB Compatibility: All SRAM Road DUB BBs - Chainring Size: n/a - Bolt Circle Diameter (BCD): 110 BCD - Chainline: n/a - BB Spindle Interface: DUB - Chainring material: n/a - Guard: No Guard - Crank arm material: Carbon - Color (Crank arm): Natural carbon - Power Meter Type: Spider

• One-piece • 170mm • 24 TPI

Low weight, efficiency, and speed: That's what Shimano's Ultegra Crankset brings to every ride. The proprietary four-arm design sheds grams and increases stiffness for more power straight to the road. Computer-designed chainrings with optimally placed ramps and pins are a revolution in front shifting with fast, smooth gear changes that set the standard. A wide range of gearing options and crank lengths offers you the opportunity to find the crank that suits your riding style.

Big air, pure speed, and total concentration: the DH world in a nutshell. It's a world where line choices are made in the blink of an eye, absolute faith in your gear is a must, and Shimano's Saint Crankset is ready to answer the call every time. Ultra-wide bottom bracket bearing spacing and hollow-forged crank arms are used for maximum rigidity and strength under demanding conditions, and a steel pedal insert adds even more burl. A single chainring keeps things simple and durable up front so you can focus on the ride, and not a dropped chain. See you at the bottom. - English threaded Shimano Hollowtech II BB included

Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers

- Series: SLX - Crank Construction: HOLLOWTECH II Technology

Calibur V2 Spindle replacement parts

- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles